Water and flooding
- Shut the water off at the main stopcock or the valve at your tank. If you cannot find either, close the isolating valve nearest the leak
- Switch off the water heater
- If water is anywhere near electrics, cut power to that circuit at the distribution board. If the board itself is wet, or water is coming through a light fitting, do not touch it
- Open taps below the leak to drain the pipework
- Move furniture, rugs and electronics out of the way
- Photograph everything before you clear up, for your landlord or insurer
Once the water is stopped, start drying. The US EPA's guide to mould and moisture advises drying wet materials within 24 to 48 hours to stop mould growing.