On this page
- AMC meaning and full form
- What an AMC covers
- Comprehensive and non-comprehensive AMCs
- Before you sign: ten clauses to read
- 1. What exactly is covered, by asset rather than category
- 2. Labour only, or parts as well?
- 3. The exclusions list
- 4. What happens at the survey
- 5. Response times, and how they are defined
- 6. Visit scheduling
- 7. Reporting
- 8. Term, notice and renewal
- 9. Who attends
- 10. Licence and insurance
- The short version
AMC meaning and full form
The full form of AMC in maintenance is annual maintenance contract. It is a year-long agreement between a property owner (or tenant, or business) and a maintenance contractor. For a fixed yearly fee, the contractor carries out scheduled service visits on the systems listed in the contract and responds to breakdowns on terms agreed in advance.
In a home in Al Ain, an AMC usually covers the AC units, plumbing and electrical systems. A commercial AMC may add pumps, lighting, doors and general building repairs. The contract should name every item it covers.
What an AMC covers
| Part of the contract | What it usually means | What to check |
|---|---|---|
| Scheduled visits | Planned servicing of the listed systems, a set number of times a year | How many visits, and in which months |
| Breakdown callouts | Attendance when something fails between visits | Response time, and whether callouts are unlimited or capped |
| Labour | Included in the fee on almost every contract | Whether out-of-hours labour costs extra |
| Parts | Included only on a comprehensive AMC | Which parts are listed, and where "major" starts |
| Reports | A record of what was done and found at each visit | Whether recommended work comes with indicative costs |
Comprehensive and non-comprehensive AMCs
A comprehensive AMC includes labour and the listed spare parts in the yearly fee. A non-comprehensive AMC covers labour and charges parts separately. Comprehensive contracts cost more up front because the contractor carries the risk of parts failing.
Whether a contract is worth paying for at all is a separate question. Our guide to AMC vs pay per call works through the cost comparison.
Before you sign: ten clauses to read
Most people read the price and the visit count and sign. The clauses that decide whether the contract was worth it are further down. This applies to our contracts as much as anyone else's. If a contractor is uncomfortable answering these, that tells you something.
1. What exactly is covered, by asset rather than category
"AC maintenance" is not a scope. How many units? Indoor only, or outdoor as well? What about the FCU in the corridor nobody thinks about?
Ask for an asset list attached to the contract. If the contractor cannot produce one, they have not surveyed the property properly, and the first dispute will be about whether something was ever in scope.
2. Labour only, or parts as well?
This is the biggest variable in AMC pricing and the one customers are most often surprised by.
Most contracts cover labour. Parts are usually extra. Some tiers include consumables such as filters and belts but exclude components. Very few include major components such as compressors and pumps, and the ones that do are priced to match.
Ask: are filters included? Are capacitors and contactors included? At what point does a part become "major"?
3. The exclusions list
Every contract has one. Read it before the inclusions, because it tells you more.
Standard exclusions are faults that existed at the start date, damage from misuse or other people's work, equipment already at the end of its life, improvement and renovation work, and anything caused by not following the contractor's recommendations.
That last one matters. If a report recommends a repair and you put it off, the results of that delay usually fall outside cover.
4. What happens at the survey
A contractor who quotes a contract without seeing the property is guessing. The guess gets corrected later, either through excluded items you did not expect or through a renewal price that jumps.
The survey should tell you up front which assets are excluded because of their condition. Finding that out during a breakdown is the worst possible time.
5. Response times, and how they are defined
"Priority response" means nothing on its own. Ask:
- What response time, for what priority of fault?
- How is priority defined, and who decides?
- Does response mean attendance, or a phone call?
- Does it change in summer? If not, how is that kept when every customer's AC fails in the same three months?
A straight answer to the last question is worth more than an unrealistic number.
6. Visit scheduling
Four visits spread evenly is worse than four visits timed well. In Al Ain, the important work falls from February to April, before inland temperatures climb into the forties. A schedule that services the AC in September has done the right work at the wrong time.
Ask when the visits fall, not just how many there are.
7. Reporting
After every visit you should receive a note of what was done, the readings taken, anything found, and a prioritised list of recommended work with indicative costs.
Without that, you cannot tell whether the contract is doing anything, and you have nothing to base next year's budget on.
8. Term, notice and renewal
- What is the term, and what notice ends it?
- Does it auto-renew?
- Is the renewal price fixed, capped or open?
- What happens if you sell the property?
Auto-renewal at an uncapped price is the clause most likely to annoy you in eighteen months.
9. Who attends
In-house staff or subcontractors? Neither is wrong. A vague answer is. You are paying for people who learn your building, and that only works if the same firm keeps turning up.
10. Licence and insurance
Ask to see the trade licence and public liability cover with a stated level. Any legitimate contractor produces both without hesitation. You can check licensing and municipality services through TAMM, the Abu Dhabi Government services portal. Our guide on how to choose a maintenance company in Al Ain covers the rest of the vetting.
The short version
Ask for the asset list, the exclusions list, the parts position, the visit schedule with dates, the response definition and the renewal terms. It takes one conversation.
Our own approach is set out on our maintenance contract page, and we give a written quote after a free survey.
Related: AMC vs pay per call: does a contract save you money? · how to choose a maintenance company